dobot
22 blocks in 5 groups. Open a block for its pins, an example and how it behaves.
dh robotics gripper
dobot
- set relative movement
dobotconnectionv14.0.1Moves the machines joint motion relative to the current coords. When you're using a 4 joint machine, the last 2 joints will be ignored. - disable
dobotconnectionv14.0.1Disables the machine - set speed
dobotconnectionv14.0.1Updates the speed in percentage of your machine, some machines allow values in excess of 100% - update jog
dobotconnectionv14.0.1Moves the machine in the given direction relative to the current position. When you're using a 4 joint machine, the last 2 joints will be ignored. JOG is updated in teaching mode, at slower speeds thus. - set coordinates
dobotconnectionv14.0.1Moves the machine into the given coords using joint motion. When you're using a 4 joint machine, the last 2 joints will be ignored. - set toolhead
dobotconnectionv14.0.1Moves the machines toolhead into the given coords using joint motion, only works on 6 axis machines - get speed
dobotconnectionv14.0.1grabs the current speed of the machine. - local devices
arrayv14.0.1Retrieves the local devices and their connection information - get coordinates
dobotconnectionv14.0.1grabs the current joints cartesian coordinates of the machine. When you're using a 4 joint machine, the last 2 joints will be ignored. - clear alarms
dobotconnectionv14.0.1Clears all the active alarms on the machine - open connection
conditionv14.0.1Opens a new dobot connection, make sure to close it. A machine only allows a single active automation. - move to safe point
dobotconnectionv14.0.1Moves the machine to the preconfigured safe home position at the current speed - get status
dobotconnectionv14.0.1grabs the current status of the machine. - get coordinate systems
dobotconnectionv14.0.1grabs the current coordinate systems from the machine - enable
dobotconnectionv14.0.1Enables the machine - get serial
dobotconnectionv14.0.1grabs the current serial of the machine. - close connection
flowv14.0.1closes the active connection with the machine, freeing up the occupied connection.
dobot output
dobot tools
dragmode
- stop drag
dobotconnectionv14.0.1disables drag mode on the robot arm - start drag
dobotconnectionv14.0.1enables drag mode on the robot arm, allowing you to move it by hand and recording or savings positions